1. Draft plan and 3D modeling.
2. Follow up with site engineer about progress of construction.
3. Prepare all drawing files properly.
4. Control project from start to finish to ensure high quality,
functional design.
5. Deal with problem that might come up during construction
process.
6. Compile project specifications.
7. Monitor construction timelines.
8. Ensure that all works are carried out to specific standards,
building codes, guidelines and regulations.
9. Make on site visits to check on project status and report on
project.
10. Others tasks assign by Design Manager.

1. Undertakes technical and feasibility studies including site
investigations.
2. Use a range of computer software for developing detailed designs
3. Undertakes complex calculations.
4. Liaise with clients and a variety of professionals including
architects and subcontractors.
5. Prepares engineering design by collecting and studying reports,
maps, drawings.
6. Creates feasibility study by analyzing engineering design,
conducting environmental impact.
7. Compiles job specs and supervising tendering procedures.
8. Resolves design and development problems.
9. Schedule material and equipment purchases and deliveries.
10.Other tasks assigned by design manager.

- Controlling project from start to finish to ensure high quality, innovative and functional design
- Detail layout for Draftsman to make sure Site Engineer easy understand
- Taking the “brief” to identify clients’ needs and put together feasibility reports and design proposals
- Visiting site to check on project status and report on project.
- Meeting with clients to determine objectives and requirements for structure.
- Estimating the amount of required materials, equipment, and construction time
- Directing workers who prepare drawings and document
- Visiting sites to ensure that construction adheres to architectural plans
- Specifying the materials needed for construction of projects
- Working with contractors, surveyors, and engineers to create a construction schedule and bring the designs to fruition
- Resolving issues that come up during construction
- Participating in project management throughout the construction

1. Scope of working:

Architect is responsible for developing and designing construction project.

2. Duties & Responsibilities:

- Involve with designing new building;
- Ensure that project designing matches with the needs and functional;
- Regular site visit to check on construction progress and produce detail drawings;
- Deal with problem that might come up during construction process;
- Extra claims raise by manager.

1. Scope of working:

Batching Plant Engineer: is responsible in inspecting work areas, controlling the operations and production of the batching plant and Equipment.

2. Duties & Responsibilities:

- Daily check and Maintenance of pneumatic pumps and valves of batching plant;
- Monitor and control errors in hydraulic system being used at the batching plant;
- Managing the stock of all raw materials aggregates, cement, filler and additive;
- Present the daily general production report of the batching plant;
- Work with site engineers to ensure accuracy in concrete production;
- Conduct a daily safety meeting to address the operating and maintenance hazards;
- Responsible for the quality control of concrete;
- Control the doze and temperature of raw material to achieve the desire temperature of concrete;
- Reads specification sheets to determine sizes of aggregates and proportions of cement and water required for batch of concrete;
- Other tasks assigned by supervisor.

1. Scope of working

Quantity Surveyor is responsible for both the outline and detailed estimate of the project cost and or a particular element thereof, based on drawings issued by the Design Department. Moreover, they will liaise with both the Design Department and the Construction Team that estimates (Barem’s) are being issued and released in line with the project “Barem” schedule.

2.Duties & responsibilities:

- Able to prepare OME (Order of Magnitude Estimate) based on the drawings issued by the Design Department.
- Prepare the detailed MTO’s (quantity take‐off) from drawings issued by the Design Department.
- Ensure the MTO’s is built up methodically, in sufficient detail and in accordance with good estimating practice.
- Able to assess cost affects when changes to the project occur; delays, variations and change orders.
- Able to prepare a statement of final account (records the actual cost of all sections of the project).
- Other tasks assign by Manager.

1. Scope of work

AutoCAD Draftsmen create technical drawings by using computer aided design software, duties such as consulting with clients, cooperating with other workers, determining required materials and construction procedures, and checking designs for mistakes.

2. Job Responsibility
- Checking & Reviewing plan information for completeness and accuracy.
- Prepare assembly and detail drawings on the basis of the information and instruction provided
- Makes necessary calculations for drawing development.
- Prepares and assists in drawing revisions are required.
- Prepares As-built drawings in the prescribed computer sheet given by the Client/Consultant and assist in Project Close-Outs.
- Maintains knowledge of Company standards and incorporate these into engineering design.
- Transform AUTOCAD drawings into 3D drawings (If required).

1. Scope of working:

Batching Plant Supervisor: is responsible in inspecting work areas to determine type of work required and materials and equipment to be used, controlling the operations and production of the batching plant and Equipment.

2. Duties & Responsibilities:

- Perform ordinary and extraordinary maintenance of batching plant;
- Maintenance of pneumatic pumps and valves of batching plant;
- Monitor and control errors in hydraulic system being used at the batching plant;
- Managing the stock of all raw materials aggregates, cement, filler and additive;
- Present the daily general production report of the batching plant;
- Work with site engineers to ensure accuracy in concrete production;
- Conduct a daily safety meeting to address the operating and maintenance hazards;
- Responsible for the quality control of concrete;
- Control the doze and temperature of raw material to achieve the desire temperature of concrete;
- Reads specification sheets to determine sizes of aggregates and proportions of cement and water required for batch of concrete;
- Other tasks assigned by superior.

1. Check and control contractor according to drawing, specification and good normal practice of engineering
2. Check and control material (request, method of usage and wastage)
3. Coordinate with contractor to plan detail schedule of work.
4. Manage on-site construction activities from start up to the completion.
5. Preparing BOQ and maintaining schedule.
6. Inspecting construction site and controlling work.
7. Check and review all MEP work and coordination with contractors.
8. Supervising daily activities and reporting.
9. Other work assigned by manager.

Tasks & Duties:
 Working on 2D/3D modeling of buildings/houses/furniture/ etc.
 Draw in/exterior modelings
 Edit 2D/3D modelings

Other benefits:
 Public Holidays
 13-month salary
 Lunch supports: 2$/day
 Annual Paid Vacation (18 days)
 Annual Trip

Working Time:
 Mon-Fri: 8:00 AM - 17:00 PM
 Sat(Morning): 8:00 AM - 12:00 PM
 Lunch Break: 12:00 PM - 13:00 PM