• Support project for order materials go to site
• Coordinate drawing and materials between site and office
• Cross check with site to support project work and keep records of all information related to project
• Other tasks as assigned.

• Make Plans using detailed drawings
• Manage parts of construction projects
• Do daily report from to office
• Oversee building work
• Set out sites
• Check technical designs and drawings to ensure that they are following correctly
• Ensure project packages to meet agreed specifications and timescales
• Other tasks as assigned.

1.Assist Senior Architectural Coordinator to coordinate, liaise, and inspect site conditions and preparations in all the Architectural works with other trades prior to the start of the construction activities.
2.To verifying the compatibility of the site with the designed permanent works. Checking for obstructions.
3.To check condition of existing property that might be damaged by the work. Making sure all existing structures, property, utilities and landscaping are properly protected.
4.To check the quality & workmanship installation of all finishing works (Tiling, ceiling, painting works & other related architectural finishing) from start to finishing.
5.To check the quality & workmanship installation of all trade (MEP, ELV, Fire and other related works in the project) from start to finish.
6.To plan & monitor all submitted approve material sample, shop drawings, RFI, method of statement and other technical documents.
7.To review and check materials delivered to site for conformance with approved samples, materials and equipment.
8.Observing site safety practices and the progress of the work. Reporting any concerns.
9.To undertake overview supervision duties on site in order to ensure general compliance of the works with shop drawings, specification and contract requirements.
10.Report on a daily basis to the QCM on all activities occurred on site.
11.Gives clear, concise and understandable instructions to Contractors to avoid abortive works and errors. Follows up with Staff to ensure compliance with requirements.
12.Prepare Snag Lists and follow up remedial works until works found satisfactory and other duties as assigned.
13.To provide and produce necessary shop drawings, detail and other technical information needed.
14.Liaise with the project team to resolve technical and detailing issues.

• Prepare architecture design based on design requirements
• Converts design sketches and establishes the technical building details that meet quality parameters, project timelines and budgetary requirements
• Performs programming, code research, material and building systems research, laying out program components and calculating program and building areas
• Prepares drawings following office standards
• Performs site surveys and field reviews to accurately document existing and new construction conditions.
• Use CAD, Sketch Up, Adobe Photoshop & In-Design, MS Office, Rendering…ect.
• Modify and update designs based on review comments from management.
• Maintain all the documentations related to architectural designs and construction conditions.
• Manage and execute design assignments in a timely manner.
• Control project from start to finish to ensure high quality, innovative and
Functional design
• Develop ideas keeping in mind client’s needs, building’s usage and
Environmental impact
• Performs all other duties, tasks and initiatives contributing to the success of the company

- Preparation of project brief for engagement of consultants and outline design requirements to consultants (MEP Engineers)
- Review and ensure MEP design and specifications comply to function, practicality, constructability and value-engineered aspects comply with building norm
- Facilitate discussion between consultant and contractor to resolve design and construction in relation to technical issues
- Preparation and presentation of Consultant Engagement Recommendation (CER) to Board of Directors
- Review design development, tender, construction, and handover to ensure design requirements are met
- Manage and liaise with consultant and contractor during project implementation on technical matters
- Responsible for coordination of MEP works to avoid discrepancies and non-compliance on-site
- Explore alternative design and specifications which are beneficial to projects
- Review concept, contractor’s work program and detail design by consultant
- Liaise with Sales & Marketing to understand product requirement
- Coordinate information inter-department/ external consultant
- Ensure design quality aligns to common building practices
- Other tasks will be assigned by the direct manager.

1. Inspect contractor’s MEP work according to shop-drawings, specifications, and requirements approved by the owner
2. Inspect shop-drawings drawn by the contractors and compare against original MEP plans drawn by designer
3. Inspect all MEP-related materials entering the site to ensure they match the materials agreed by the owner and contractor
4. Supervise on-site construction activity which includes (but not limited to) surveying of pipe locations, connecting PPR pipes, installation of septic tanks, installation of electrical wires, and testing water leakage
5. Modifying MEP plans based on site manager/owner’s instructions & requirements
6. Coordinate with structural and architectural work to ensure a smooth workflow and timing on work is done according to requirements
7. Create reports on major issues with the contractor’s work and propose solutions
8. Spot irregularities or flaws in the MEP systems designed MEP designer and propose solutions to the systems
9. Able to prepare Bill of Quantities (BOQ) for all MEP-related work

- Perform engineering design evaluations and lead project engineering design, specific to the plumbing discipline. Recommend alterations to development and design to improve quality.
- Responsible for all aspects of engineering design, specific to the plumbing discipline within designated projects. Requires a strong understanding of building codes.
- Prepares engineering analysis of projects, to include: preliminary design, budget analysis, calculations, life cycle costs, and equipment specifications.
- Conducts surveys to gather field data; prepares drawings, layouts, and other visual aids; prepares technical construction specifications.
- Deliver technical presentations to internal and external audiences as required as part of the design process.

› Participates in final inspection of improvement projects and makes recommendation regarding acceptance of construction work.
› Review building plans and site design for aesthetics, environmental acceptability, compliance with codes and standards and accessibility requirements.
› Designs projects and/or review architectural or engineering plans, specifications and contract documents to ensure compliance with government codes, laws and regulations.
› Provides technical expertise in development or review of policies and procedures in relation to architectural structures and systems and construction/safety codes.
› Performs design drafting including preliminary drawings, working drawings and full detail drawings for architectural, structural and mechanical works associated with building construction or improvement projects.
› Reviews Subcontractor's shop drawings to ensure compliance with specifications and contract agreements by checking them for technical accuracy according to accepted guidelines.
› Originates and develops creative design concepts and design documents in all phases.
› Collaborates with project team to ensure design intent and conformance to quality assurance, quality control and best practice standards.
› Other tasks as assigned.

- Prepare tender documents, contracts, budgets, bills of quantities and other documentations
- Price/forecast the cost of the different materials needed for the project
- Procure subcontractors who work on the construction of the project
- Measure and value the work done on site
- Prepare document for subcontractors’ payment
- Select and/or source construction materials
- Write reports

- Drawing
- Design structure and architect
- Prepare material and estimate cost of project
- Making contract agreement between company and construction contractor according to company’s policy and regulations.
- Checking and monitoring the quality, quantity of building and process of work and report to head of section.
- Follow up process of work every week.
- Update maps every estate in oil palm project
- Check boundary chemical spay and land clearing
- Update oil palm boundary
- Participating authority and people living surrounding workplace to ensure internal unity and security to the company.